Proudly Serving These Industries...

• Industrial Machinery  • Water  
• Agriculture • Ground Support
• Mobile • Waste
• Energy (Wind, Steam, Coal, Hydro)     • Entertainment
• Marine • Defense
 

BITELOK ONE-PIECE CRIMP COUPLINGS

RYCO BITELOK Crimp Couplings are permanently attached fittings, assembled onto the hose with a swaging press.

bitelok onepiececrimpcouplings 2

RYCO BITELOK One-Piece Crimp Couplings have the ferrule already attached to the hose insert at the factory. This eliminates the possibility of selecting the wrong ferrule type when fabricating hose assemblies, which can cause failure of the assembly.

Each BITELOK One-Piece Crimp Coupling Series suits specific styles of hose, as shown in the table below. T1000, T2000, T4000, T7000 and T9000 BITELOK One-Piece Crimp Couplings Series can be used on more than one hose style - only the finished crimp diameter changes.

BITELOK One-Piece Crimp couplings eliminate the need to "skive" the cover off the hose before attaching the couplings - even for Spiral reinforced hoses. This makes assembly simple, quick and efficient. Simply push the coupling onto the hose to the correct mark length, and crimp the ferrule. The teeth inside the ferrule BITE down though the cover to LOK onto the reinforcement wires*.

* T4000 Series for One and Two Braid Textile reinforced hoses do not bite down to the textile reinforcement.

 

BITELOK
SERIES
SUITS HOSE TYPE RYCO HOSE SERIES and SIZES
T1000 R17 Wire Braid
No Series Code Grooves
at end of Ferrule
For RYCO Hose Series T3000, T3600 all sizes.
T2000 One and Two Wire Braided Hoses
Two Series Code Grooves
at end of Ferrule

For RYCO Hose Series T1A, T1D, T1F, T1S, T2A, T2D, T2S, T2C, DF2A, TXA2D, TJ2D,
RQP1, RQP2, TW1, PW2 up to size -48.
For RYCO Hose Series T3000, T3600, T4000, T5000, T6000, E2, BT1.
For RYCO Hose Series CS1000, MS1000 up to -32.

T4000 Some One and Two Textile
Braided Hoses
THREE Series Code Grooves
at end of Ferrule
For RYCO Hose Series SR and SRF sizes -12 to -32.
For RYCO Hose Series M2, M2G, PL1, PL1D and RQP6 sizes -4 to -12.
For RYCO Hose Series MP1 sizes -4 to -20.
For RYCO Hose Series RQP5 and T5 sizes -4 to -12.
For RYCO Hose Series CS1000, MS1000 sizes -20 to -32.
T6000 Selected Spiral Hoses
THREE Series Code Grooves
at top and end of Ferrule
For RYCO Hose Series H5000 size -32. 
For RYCO Hose Series H6000 size -12 to -32.
T7000 Selected Spiral Hoses
One and Two Wire Braided Hoses
FOUR Series Code Grooves
at end of Ferrule
For RYCO Hose Series H3000, H4000, T1A, T1D, T1F, T1S, T2A, T2D, T2S, T2C, BT1,
E2, D2B, DF2A, H12A, H12D, H12S, TXA2D, RQP1, RQP2 all sizes.
For RYCO Hose Series H5000 up to -24.
For RYCO Hose Series H6000 up to -20.
For RYCO Hose Series R4SP (cover must be skived) and R4SH (sizes -20 to -32).
T9000 Selected Spiral Hoses
SIX Series Code Grooves
at end of Ferrule
For RYCO Hose H5032, H6024, R4SH12, R4SH16.
TT000 SINGLE Series Code Groove at end of Ferrule For RYCO Hose Series RTH1 all sizes.
TP000 TWO Knurled Series Code Grooves at top and end of Ferrule For RYCO Hose Series TP7, TP8, TP3000 all sizes.
TG000 Knurled Series Code Grooves at end of Ferrule For RYCO Hose Series TPGL.