Directional Control Valves

Description

PDF

Dynex D03Valve

HP Pattern Spool Valves  

  • HP03 pattern valves rated for 15 U.S. gpm at 10 000 psi (57 L/min at 700 bar)
  • HP05 pattern valves rated from 5 to 25 U.S. gpm at 8000 psi (19 to 95 L/min at 560 bar)
  • Simple spool valves eliminate complex valve circuits for four-way control in high pressure systems 
  • Full range of actuators, spools and electrical options

HP03 High Pressure

 

HP05 High Pressure

Dynex D08

N.F.P.A./ISO Pattern Valves

  • 5000 psi (350 bar) valves with models rated to 165 U.S. gpm (625 L/min)
  • Low pressure drop with large internal flow passages
  • Smooth spool movement with four-land design
  • Full range of actuators, spools and electrical options

D03 Dir Control Valve

D05 Dir Control Valve

D08 Dir Control Valve

D05H Dir Control Valve

D08H Dir Control Valve

Dynex VST Valve 1

VST Series Seated Valves
  • High pressure with low leakage
  • Reliable shifting with non-silting ball-on-seat design
  • Two position, two-way valves, rated for 1 U.S. gpm at 15 000 psi (3,8 L/min at 1040 bar), for low flow venting functions
  • Two position, three-way valves, rated for 5 U.S. gpm at 10 000 psi (19 L/min at 700 bar), for load holding functions

VST Seated Control Valve

Sandwich

Valves

Description

PDF
Dynex VSW Sand

Accessory Sandwich Valves 

  • Sandwich valves, which mount under directional valves, save space, reduce weight and provide flexibility in locating valves
  • Standard pressure valves, rated for 3000 psi (210 bar), mount on N.F.P.A. D03 and D05 (ISO 03 and 05) patterns and D05H size valves
  • High pressure VSW Series, with HP03 mounting interface, are rated for 10 000 psi (700 bar)
  • VSW Series, with HP05 mounting interface, are rated for 8000 psi (560 bar)
  • Functions include flow control, relief, pressure reducing, counterbalance, decompression, and check valves
 

Electro-Hydraulics

Description

PDF

H8819 Proportional Relief

  • Proportional relief valves regulate pressure and protect your circuits.
  • Two models available:
    Rated to 50 US gpm at 15 000 psi (190 L/min at 1040 bar), or
    Rated to 75 US gpm at 9000 psi (284 L/min at 620 bar).
  • Electrohydraulic models for remote control proportional to a variable electrical input signal.
  • Compatible with various military fluids, Skydrol and other phosphate ester fluids.
  • Manifold mounted or line connected.
  • Optional integral vent valve for remote pressure control.

H8819 Series

 Electrohydraulic Linear Actuator

  • Remote control of output rod movement proportional to an electrical input signal
  • Used to stroke variable pumps and motors, spools of large valves, throttle controls, clutches or brakes
  • Compact, direct-mounting provides easy conversion of existing components for remote control
  • Models available to extend or retract 0.5 inch (12,7mm) or 1.0 inch (25,4mm)
  • Output force from 60 to 1200 lb (0,27 to 5,33 kN)
  • Simple design provides accurate control without additional electronic feedback

SA Series

 

Pressure Control Valves

Description

PDF
VH Pressure Controls
  • Flows to 30 U.S. gpm at pressures to 15 000 psi (114 L/min at 1040 bar).
  • Relief valves regulate pressure and protect circuits.
  • Unloading valves divert pump output to tank in response to a pilot pressure signal.
  • Decompression valves reduce flow surges for less vibration and noise.
  • Suitable for use with some water-based, fire-resistant and other special fluids including water glycol, various military fluids, Skydrol and other phosphate ester fluids.
  • Line connected or subplate mounted.
  • Optional integral vent valve for remote pressure control.

VH Series

8800 Spool Valves
  • Spool valves for consistent control of pressure regardless of flow variations.
  • Relief, reducing, unloading, counterbalance and sequence functions available
  • Rated to 90 US gpm at 5000 psi (341 L/min at 350 bar).
  • Some models available with integral reverse free-flow check valves.
  • Optional integral vent valve for remote pressure control.

8800 Spool

8800 Poppet Style Valves
  • Poppet style valves for fast response to regulate pressure.
  • Relief and accumulator unloading functions available
  • Rated to 40 US gpm at 5000 psi (151 L/min at 350 bar).
  • Optional integral vent valve for remote pressure control.

8800 Poppet