Supplier

Description

PDF

Continental - Directional Control Valves

• Mounting: Sub-plate or manifold mount in D03, D05, D08, and D10
• configurations, Conforming to NFPA and ANSI/ISO Standards 
• High Flow rates
  • D03 up to 20 GPM 
  • D05 up to 35 GPM
  • D08 up to 150 GPM
  • D10 up to 275 GPM
• Pressures up to 5000 PSI 
• Seals – Viton 
• Available Standard Actuator Types: solenoid, air, cam, lever, and soft-shift styles
• Fluids: Petroleum-base, most phosphate esters, water-based fluids (not more than 40% water) and water glycol

PowerFlow Dir Control Valve

Wash Down Open Option

Double Redundant Control Valves

Pattern Directional Control Valves

D03 PATTERN DIRECTIONAL CONTROL VALVES

Nominal Flow: 8 gpm (30 L/min), Max Flow: 15 gpm (57 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuators Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Exceptionally low pressure drop.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

D05 – N.F.P.A. D05/ISO 05 PATTERN DIRECTIONAL CONTROL VALVES

Nominal Flow: 20 gpm (76 L/min), Max Flow: 40 gpm (152 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Exceptionally low pressure drop.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

D08 – N.F.P.A. D08/ISO 08 PATTERN DIRECTIONAL
CONTROL VALVES

Nominal Flow: 40 gpm (151 L/min), Max Flow: 90 gpm (341 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Manual Lever; Solenoid Piloted; Hydraulic Piloted; Air Piloted.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

D03 Pattern Dir Control Valve

D05 Pattern Dir Control Valve

High Pressure and High Flow Valves N.F.P.A./ISO Pattern Valves

HP03 (Special High Pressure Pattern) DIRECTIONAL
CONTROL VALVES

Nominal Flow: 5 gpm (19 L/min), Max Flow: 15 gpm (57 L/min)
Rated Pressure: 10 000 psi (700 bar)

• Actuator Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Special mounting pattern required.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

HP05 – N.F.P.A. (Special High Pressure Pattern) DIRECTIONAL CONTROL VALVES

Nominal Flow: 5 gpm (19 L/min), Max Flow: 25 gpm (95 L/min)
Rated Pressure: 8 000 psi (560 bar)

• Actuator Options include: Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Special mounting pattern required.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

D05H – N.F.P.A. D05/ISO 05 PATTERN (With”X” and “Y” ports for external pilot and drain) DIRECTIONAL CONTROL VALVES

Nominal Flow: 30 gpm (114 L/min), Max Flow: 40 gpm (151 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Solenoid Pilot; Hydraulic Piloted; Air Piloted.
• Special mounting pattern required.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

D08H – N.F.P.A. D08/ISO 08 PATTERN DIRECTIONAL CONTROL VALVES

Nominal Flow: 80 gpm (303 L/min), Max Flow: 165 gpm (625 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Exceptionally low pressure drop.
• Wide range of Spool types, Electrical connections and Solenoid options.

HP03

HP05

D05H

D08H

Directional Valves
These valve are used for shifting oil flow direction of hydraulic circuit and for actuator starting/stopping as well as the
operating direction shifting of actuator.

• Solenoid Operated Directional Valves
• Solenoid Controlled Pilot Operated Directional Valves
• " G" Series Shockless Type Directional Valves
• Pilot /Manually/Mechanically Operated Directional Valves
• Poppet Type Directional Valves
• Check /Pilot Controlled Check Valves