Hose Protection
| Inside Diameter | Recommended | Construction | Performance Specifications Met or Exceeded | |
FS FIRE SLEEVE |
-08 to -104 1/2" to 6.1/2" |
Protection of hoses from heat and molten metal splashes. |
Braided glass fibre tubing coated with silicon rubber. |
SAE Aerospace Standard AS 1072 |
RCS CROCSLEEVE
|
23 to 129 mm 7/8" to 5" |
Burst and pinhole protection. Protection of hoses from abrasion. Bundling hoses together. |
Woven polyamide. RCSB - Black. RCSR - Red. |
MSHA approved FRAS |
RH RAWHIDE |
23 to 93 mm 7/8" to 3.5/8" |
Protection of hoses from severe abrasion. Bundling hoses together. |
Woven nylon tubing. | MSHA approved |
RSG SPIRAL GUARD |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Black. |
|
RSGF SPIRAL GUARD FRAS |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Dark Grey. |
MSHA approved FRAS |
RSGY SPIRAL GUARD |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Yellow |
|
RWA PUSH ON |
12 to 75 mm 1/2" to 3" |
Protection of hose cover from abrasion and gouges. |
Spring Steel Wire, galvanised. |
|
RHYS PACKAGING SLEEVE |
48 & 79 mm 1.9" and 3.1" |
Packaging and protection of hose assemblies during transport and storage. |
Heavy duty, low density polyethylene sleeve. |
|
RHYT RHYT-10, -32 |
Suits sizes -04 to -10 & -12 to -32 |
Permanent identification of hose assemblies. |
High performance plastic. |
|
RHWT RHWT-10, -32 |
Suits sizes -04 to -10 & -12 to -32 |
Permanent identification of hose assemblies. |
High performance plastic. |
|
750/760 SPRING GUARD |
Suits some -04 (1/4") & -06 (3/8") hoses |
Control bend radius at end of hose assemblies. |
Spring Steel Wire, galvanised. |
