Motor

G400 Series

Compact Dynamic Brushless Servo Motors

Features

• AC Servo Motor (Synchronous)
• Low inertia, compact length
• Type of Motor: Totally enclosed, natural cooling (optional fan ventilation)
• High voltage (600 Vdc Brushless Servo Motor) available
• Flameproof servo motors available

Benefits

• Superior dynamics improves cycle time
• Compact, lightweight
• Proprietary low-cogging design
• Rugged, minimum maintenance
• Flexible design

Fastact G400 Series Brushless Servomotor

Fastact J

Maximum Dynamic Brushless Servo Motors

Features

• AC Servo Motor (Synchronous)
• Large selection of models
• Very high angular acceleration
• High continuous power with fan cooling
• Very high power density with liquid cooling
• 600V DC Brushless Motor

Benefits

• Greater productivity due to higher performance and faster operation
• Improved product quality through more accurate control
• Increased energy efficiency by reducing moving masses
• Higher level of flexibility through a full range of servo motors with the highest dynamics

Maximum Dynamic Brushless Servo Motors

G493 Series

Explosion Proof

Explosion Proof Dynamic Brushless Servo Motors

Features

• ATEX and CE certified
• AC Servo Motor (Synchronous)
• Low Inertia
• Natural Cooling

Benefits

• Compact, lightweight
• Proprietary low cogging design
• Rugged, minimum maintenance
• Flexible design

G493 Series Explosion-Proof Brushless Servomotors

Wind Turbine Pitch Motor

Wind Turbine Pitch Motor

Key Features

• High power density for short periods – The compact motor is optimized to reach the required torques and speeds needed for safe feathering even during the grid loss condition in pitch control applications.
• Long life and low maintenance – Using AC synchronous motor technology lowers the amount of parts that could possibly suffer from mechanical wear, leading to a product with extremely long life and very low-maintenance for both on- and offshore applications.
• Sensorless control for extra safety – In the event that information on the position of the motor is lost from the motor’s resolver, the pitch servo drive can control the motor, in order to guarantee the safety operation of the wind turbine.

Wind Turbine Pitch Motor

Coupling

Description

Flexible Drive Couplings

Magnaloy offers 9 models of magnesium drive couplings and 1 model of a powdered metal drive coupling. The PM90 model coupling (powdered metal) is available in bore sizes from 7/16 inch (12 mm) to 1 1/8 inch (28 mm) with torque ratings up to 672 in-lbs. The premium line of drive couplings (magnesium) are available in bore sizes from 3/8 inch (10 mm) up to 4 3/4 inch (120 mm) and torque ratings up to 71,763 in-lbs.  Please note that some Special, Spline or MetricBored Coupling Hubs and Clamp Style Coupling Hubs are NON-RETURNABLE.

Electric Motor

Description

Hyundai Premium Efficiency Motors – C-Face – Rigid Base

•  1 - 200 HP
•  3600, 1800 and 1200 RPM
•  208-230/460 volt
•  TEFC enclosure
•  Dual rated service factor - 1.15 for 40°C / 1.0 for 65°C
•  Class F insulation
•  C-face - rigid base
•  Premium efficiency (meets or exceeds EISA 2007 requirements
•  defined in NEMA MG-1 table 12-12 as NEMA Premium)
•  3 year warranty
•  NEMA Design B
•  Cast iron frame and conduit box
•  Suitable for part winding start on low voltage (1 - 125 HP)
•  Suitable for wye-delta start (15 - 200 HP)
•  Inverter ready 10:1 CT / 20:1 VT
•  Double drilled feet to accomodate mounting flexibility (324TC - 449TC)
•  F2 field mountable
•  Class I, Division II, Groups A, B, C, D
•  CC# 038A

Hyundai Premium Efficiency Motors – C-Face – Round Body

•  1 - 40 HP
•  1800 RPM
•  208-230/460 volt
•  TEFC enclosure
•  Dual rated service factor - 1.15 for 40°C / 1.0 for 65°C
•  Class F insulation
•  C-face - round body
•  Premium efficiency (meets or exceeds EISA 2007 requirements
•  defined in NEMA MG-1 table 12-12 as NEMA Premium)
•  3 year warranty
•  NEMA Design B
•  Cast iron frame and conduit box
•  Suitable for part winding start on low voltage (1 - 40 HP)
•  Suitable for wye-delta start (15 - 40 HP)
•  Inverter ready 10:1 CT / 20:1 VT
•  F2 field mountable
•  Class I, Division II, Groups A, B, C, D
•  CC# 038A

WWE Electric Motor Catalog

Piston Motor

Description

• Pressures to 8000 psi (560 bar)
• Ideal for applications subject to pressure spikes, vibration, constant starting/stopping, and sudden direction reversals.
• Compact motors produce torque to 4775 lb·in at 5000 psi (540 N·m at 350 bar)

Piston Motors

Series

D03 Series

D03  Manifolds (Parallel)

Pressure Rating: 5000 psi
Material:  6061-T6 Aluminum

D03 Subplate Side Ported
Port Size: 9/16-18 O-ring ports (4) (SAE -6)
Pressure Rating: 5000 psi
Material: 6061-T6 Aluminum
Two (2) 1/4-20 X 1 inch long socket head cap screws are furnished with each subplate

D03 Manifolds  

D03 Subplate

D08 Manifolds (Parallel)

Pressure Rating: 3500 psi
Material:  6061-T6 Aluminum

D08 Subplate Side Ported
Port Sizes:  P, T, A & B 1 5/16-12 O-ring port (SAE -16)
• X & Y 9/16-18 O-ring port (SAE -6)
Two (2) 1/2-13 X 2 long socket head cap screws are furnished with each subplate

D08 Cover Plate

Items Furnished with Cover Plate:
• Six (6) 1/2-13 X 1-1/2 long socket head cap screws
• Two (2) small Viton O-rings 
• Four (4) large Viton O-rings
• Two (2) Roll Pins

D08 Manifolds

D08 Cover Plates

D05 Manifold (Parallel)

Pressure Rating: 4500 psi

D05 Subplates:

Side Ported
Port Size: 3/4-16 O-ring ports (4) (SAE -8)
Two (2) 3/8-16 X 1 1/2 long socket head cap screws are furnished with each subplate

 Dual Ported
Port Size: 3/4-16 O-ring ports (6) (SAE -8)
Two (2) 3/8-16 X 2 1/2 long socket head cap screws are furnished with each subplate

D05 Cover Plate

D05 Manifolds

D05 Subplate

D05 Cover Plate

In-Line Valve Bodies:

• For cartridge type 2-way valves
• For cartridge type 3-way valves
• For cartridge type 4-way valves

Pressure Rating: 3500 psi
Material:  6061-T6 Aluminum

Inline Bodies