Supplier

Description

PDF

 

 

  
Dynex D03Valve

HP03 High Pressure Valves

Special High Pressure Pattern Directional Control Valves

Nominal Flow: 5 gpm (19 L/min), Max Flow: 15 gpm (57 L/min)
Rated Pressure: 10 000 psi (700 bar)

  • Actuator Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
  • Special mounting pattern required.
  • Full range of Spool types, Actuators, Electrical connections and Solenoid options.

HP03 High Pressure Dir Control Valve
Dynex HP05

HP05 High Pressure Valves

N.F.P.A. Special High Pressure Pattern Directional Control Valves

Nominal Flow: 5 gpm (19 L/min), Max Flow: 25 gpm (95 L/min)
Rated Pressure: 8 000 psi (560 bar)

  • Actuator Options include: Direct Solenoid; Hydraulic Piloted; Air Piloted.
  • Special mounting pattern required.
  • Full range of Spool types, Actuators, Electrical connections and Solenoid options

HP05 High Pressure Dir Control Valve

 Dynex VST Valve 1

VST Series Seated Valves

Special HP03 Pattern Directional Control Valves

Two position, two-way valves – rated for: 5 gpm at 10 000 psi
(19 L/min at 700 bar), for low-flow venting functions.
Two position, three-way valves – rated for: 5 gpm at 10 000 psi
(19 L/min at 700 bar), for load holding functions.
Vent valves – rated for: 1 gpm at 15 000 psi (3,8 L/min at 1040 bar) .

  • Non-silting ball-on-seat design.

 

VST Seated Control Valve

 

Dynex VSW Sand

 

VSW Series Sandwich Valves

High Pressure Accessory

HP03 Pattern:
Rated Pressure to: 10 000 psi (700 bar)
Max Flow to 10 gpm (38 L/min)
HP05 Pattern:
Rated Pressure to: 8 000 psi (700 bar)
Max Flow to 5 gpm (19 L/min)

  • Mounts under high pressure directional control valves.
  • Available as Check, Decompression, Relief funtions.

 

 
     

Electro-Hydraulic Proportional Relief Valves
Relief valves with manual control allow you to simply regulate maximum pressure.

Models with electric vent control are available in either “normally-open” or “normally-closed” configurations.
Electro-hydraulic models provide remote control for infinitely variable pressure settings up to the maximum pressure.
H8819 SERIES
50 GPM at 15,000 PSI (190 l/min. at 1040 bar)

75 GPM at 9,000 PSI (284 l/min. at 620 bar)

H8819 Series

Towler Directional Control Valves

  • Working maximum pressure of 7250 psi (500 bar)
  • Flow ratings up to 2000 litres/min

Towler VD
Oilgear WNC ReliefValve  Ultra-High Pressure Relief Valves
  • Size: 1/16" - 5/16 "
  • Max Pressure: 4135

WNC