Proudly Serving These Industries...
| • Industrial Machinery | • Water |
| • Agriculture | • Ground Support |
| • Mobile | • Waste |
| • Energy (Wind, Steam, Coal, Hydro) | • Entertainment |
| • Marine | • Defense |
products
BITELOK ONE-PIECE CRIMP COUPLINGS
RYCO BITELOK Crimp Couplings are permanently attached fittings, assembled onto the hose with a swaging press.
RYCO BITELOK One-Piece Crimp Couplings have the ferrule already attached to the hose insert at the factory. This eliminates the possibility of selecting the wrong ferrule type when fabricating hose assemblies, which can cause failure of the assembly.
Each BITELOK One-Piece Crimp Coupling Series suits specific styles of hose, as shown in the table below. T1000, T2000, T4000, T7000 and T9000 BITELOK One-Piece Crimp Couplings Series can be used on more than one hose style - only the finished crimp diameter changes.
BITELOK One-Piece Crimp couplings eliminate the need to "skive" the cover off the hose before attaching the couplings - even for Spiral reinforced hoses. This makes assembly simple, quick and efficient. Simply push the coupling onto the hose to the correct mark length, and crimp the ferrule. The teeth inside the ferrule BITE down though the cover to LOK onto the reinforcement wires*.
* T4000 Series for One and Two Braid Textile reinforced hoses do not bite down to the textile reinforcement.
| BITELOK SERIES |
SUITS HOSE TYPE | RYCO HOSE SERIES and SIZES |
| T1000 | R17 Wire Braid No Series Code Grooves at end of Ferrule |
For RYCO Hose Series T3000, T3600 all sizes. |
| T2000 | One and Two Wire Braided Hoses Two Series Code Grooves at end of Ferrule |
For RYCO Hose Series T1A, T1D, T1F, T1S, T2A, T2D, T2S, T2C, DF2A, TXA2D, TJ2D, |
| T4000 | Some One and Two Textile Braided Hoses THREE Series Code Grooves at end of Ferrule |
For RYCO Hose Series SR and SRF sizes -12 to -32. For RYCO Hose Series M2, M2G, PL1, PL1D and RQP6 sizes -4 to -12. For RYCO Hose Series MP1 sizes -4 to -20. For RYCO Hose Series RQP5 and T5 sizes -4 to -12. For RYCO Hose Series CS1000, MS1000 sizes -20 to -32. |
| T6000 | Selected Spiral Hoses THREE Series Code Grooves at top and end of Ferrule |
For RYCO Hose Series H5000 size -32. For RYCO Hose Series H6000 size -12 to -32. |
| T7000 | Selected Spiral Hoses One and Two Wire Braided Hoses FOUR Series Code Grooves at end of Ferrule |
For RYCO Hose Series H3000, H4000, T1A, T1D, T1F, T1S, T2A, T2D, T2S, T2C, BT1, E2, D2B, DF2A, H12A, H12D, H12S, TXA2D, RQP1, RQP2 all sizes. For RYCO Hose Series H5000 up to -24. For RYCO Hose Series H6000 up to -20. For RYCO Hose Series R4SP (cover must be skived) and R4SH (sizes -20 to -32). |
| T9000 | Selected Spiral Hoses SIX Series Code Grooves at end of Ferrule |
For RYCO Hose H5032, H6024, R4SH12, R4SH16. |
| TT000 | SINGLE Series Code Groove at end of Ferrule | For RYCO Hose Series RTH1 all sizes. |
| TP000 | TWO Knurled Series Code Grooves at top and end of Ferrule | For RYCO Hose Series TP7, TP8, TP3000 all sizes. |
| TG000 | Knurled Series Code Grooves at end of Ferrule | For RYCO Hose Series TPGL. |
RYCO Couplings
BITELOK ONE-PIECE CRIMP COUPLINGS
|
BITELOK TWO-PIECE CRIMP COUPLINGS
|
PUSH ON AND SUCTION & RETURN COUPLINGS
|
||||||||||||||||||||||||
FIELD ATTACHABLE COUPLINGS
|
||||||||||||||||||||||||||
GREASING AND LUBRICATION
| Size Inside Diameter |
Recommended | Construction | Performance Specifications Met or Exceeded | COUPLING Series | |
TPGL GREASE LINE |
-02 1/8" |
High pressure greasing and lubrication systems. |
Oil resistant seamless thermoplastic tube. One or two braids of synthetic fibre reinforcement. Oil and abrasion resistant thermoplastic perforated cover. |
TG000 6000 (P000) |
|
R4000 |
-03 3/16" |
Flexible Grease Gun extension for high pressure greasing and lubrication systems. |
Oil resistant synthetic rubber tube. One braid of high tensile steel wire reinforcement. Oil and abrasion resistant synthetic rubber cover. |
- |
Hose Protection
| Inside Diameter | Recommended | Construction | Performance Specifications Met or Exceeded | |
FS FIRE SLEEVE |
-08 to -104 1/2" to 6.1/2" |
Protection of hoses from heat and molten metal splashes. |
Braided glass fibre tubing coated with silicon rubber. |
SAE Aerospace Standard AS 1072 |
RCS CROCSLEEVE
|
23 to 129 mm 7/8" to 5" |
Burst and pinhole protection. Protection of hoses from abrasion. Bundling hoses together. |
Woven polyamide. RCSB - Black. RCSR - Red. |
MSHA approved FRAS |
RH RAWHIDE |
23 to 93 mm 7/8" to 3.5/8" |
Protection of hoses from severe abrasion. Bundling hoses together. |
Woven nylon tubing. | MSHA approved |
RSG SPIRAL GUARD |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Black. |
|
RSGF SPIRAL GUARD FRAS |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Dark Grey. |
MSHA approved FRAS |
RSGY SPIRAL GUARD |
16 to 110 mm (OD) 5/8" to 4.1/2" |
Protection of hoses from abrasion and impact. Bundling hoses together. |
Polyethylene plastic spiral. Yellow |
|
RWA PUSH ON |
12 to 75 mm 1/2" to 3" |
Protection of hose cover from abrasion and gouges. |
Spring Steel Wire, galvanised. |
|
RHYS PACKAGING SLEEVE |
48 & 79 mm 1.9" and 3.1" |
Packaging and protection of hose assemblies during transport and storage. |
Heavy duty, low density polyethylene sleeve. |
|
RHYT RHYT-10, -32 |
Suits sizes -04 to -10 & -12 to -32 |
Permanent identification of hose assemblies. |
High performance plastic. |
|
RHWT RHWT-10, -32 |
Suits sizes -04 to -10 & -12 to -32 |
Permanent identification of hose assemblies. |
High performance plastic. |
|
750/760 SPRING GUARD |
Suits some -04 (1/4") & -06 (3/8") hoses |
Control bend radius at end of hose assemblies. |
Spring Steel Wire, galvanised. |
THERMOPLASTIC
| Size Inside Diameter |
Recommended | Construction | Performance Specifications Met or Exceeded | COUPLING Series | |
TP7 SPIDERLINE R7 |
-03 to -16 3/16" to 1" |
High pressure hydraulic oil lines; pilot lines; greasing and lubrication lines; and some pneumatic and water lines. |
Oil resistant seamless thermoplastic tube. One or two braids of synthetic fibre reinforcement. Oil and abrasion resistant thermoplastic perforated cover. |
AS 3791 100R7 EN 855 TYPE R7 ISO 3949 SAE 100R7 |
T1000 T4000 |
TP7N ISOLATOR R7 |
-04 to -16 1/4" to 1" |
Hydraulic oil lines where electrical non-conductivity is required. |
Oil resistant seamless thermoplastic tube. One or two braids of synthetic fibre reinforcement. Oil and abrasion resistant thermoplastic cover. |
AS 3791 100R7 EN 855 TYPE R7 ISO 3949 SAE 100R7 |
T1000 T4000 |
TP7T SPIDERLINE TWIN R7 |
-04 to -08 1/4" to 1/2" |
Payout and return reels on forklifts and cranes, dispensing equipment and other applications requiring two hoses. |
Oil resistant seamless thermoplastic tube. One or two braids of synthetic fibre reinforcement. Oil and abrasion resistant thermoplastic perforated cover. |
AS 3791 100R7 EN 855 TYPE R7 ISO 3949 SAE 100R7 |
T1000 T4000 |
TP7TN ISOLATOR TWIN R7 |
-04 to -08 1/4" to 1/2" |
Payout and return reels on forklifts and cranes, hydraulic powered hand tools and other applications requiring two hoses. |
Oil resistant seamless thermoplastic tube. One or two braids of synthetic fibre reinforcement. Oil and abrasion resistant thermoplastic cover. |
AS 3791 100R7 EN 855 TYPE R7 ISO 3949 SAE 100R7 |
T1000 T4000 |
TP8 SPIDERLINE R8 |
-04 to -08 1/4" to 1/2" |
High pressure hydraulic oil lines; pilot lines; greasing and lubrication lines; and some pneumatic and water lines. |
Oil resistant seamless thermoplastic tube. One or two braids of aramid fibre reinforcement. Oil and abrasion resistant thermoplastic perforated cover. |
AS 3791 100R8 EN 855 TYPE R8 ISO 3949 SAE 100R8 |
T1000 |
TP8N ISOLATOR R8 |
-04 to -08 1/4" to 1/2" |
Hydraulic oil lines where electrical non-conductivity is required. |
Oil resistant seamless thermoplastic tube. One or two braids of aramid fibre reinforcement. Oil and abrasion resistant thermoplastic cover. |
AS 3791 100R8 EN 855 TYPE R8 ISO 3949 SAE 100R8 |
T1000 |
TP8T SPIDERLINE TWIN R8 |
-04 to -08 1/4" to 1/2" |
Payout and return reels on forklifts and cranes, dispensing equipment and other applications requiring two hoses. |
Oil resistant seamless thermoplastic tube. One or two braids of aramid fibre reinforcement. Oil and abrasion resistant thermoplastic perforated cover. |
AS 3791 100R8 EN 855 TYPE R8 ISO 3949 SAE 100R8 |
T1000 |
TP8TN ISOLATOR TWIN R8 |
-04 to -08 1/4" to 1/2" |
Payout and return reels on forklifts and cranes, hydraulic powered hand tools and other applications requiring two hoses. |
Oil resistant seamless thermoplastic tube. One or two braids of aramid fibre reinforcement. Oil and abrasion resistant thermoplastic cover. |
AS 3791 100R8 EN 855 Type R8 ISO 3949 SAE 100R8 |
T1000 |
TP3000 SPIDERLINE N8 |
-04 to -08 1/4" to 1/2" |
Medium pressure hose suitable for petroleum or synthetic based hydraulic fluids in forklift systems. |
Polyester elastomer tube. One or two braids of synthetic fibre reinforcement. Special polyester, black with white inkjet branding. Cover is perforated (pin-pricked). |
SAE 100 R18 | T4000 |
Page 26 of 51