Royal Hydraulics - products

Proudly Serving These Industries...

• Industrial Machinery	• Water
• Agriculture	• Ground Support
• Mobile	• Waste
• Energy (Wind, Steam, Coal, Hydro)	• Entertainment
• Marine	• Defense

products

CurtissWrightLogo RGB S

Penny & Giles Joysticks	Description	PDF
	Multi-Axis Contactless Joystick Controller Product Code: JC2000 Key Features Compact size Depth below panel less than 31mm Contactless sensing system No flexing wires (except when handle switches fitted) Dual independant outputs on single/dual axis versions Choice of handles with or without switch Aligned seats (low force lever guidance) Polarised latching connector CE Approved	JC2000
	Finger Operated Joystick Controller Product Code: JC3000 Key Features Single or Dual axis operation Rugged design using cast components Protected to IP66 above the flange Range of fingertip handle styles Superb proportional control with analog and center/directional switched outputs Choice of track resistance values and output ranges Switched output option with detent feel - up to 5 positions in each half axis Long operational life	JC3000
	Multi-Axis Fingertip Joystick Controller Product Code: JC400 Key Features Single, Dual or Three axis operation Choice of mounting flanges Sealed to IP65 above the flange Range of ergonomic handle designs Lever gate profile and lever spring strength options Superb proportional control with analogue and switched outputs Choice of track resistance values and output ranges Digital (switched) output option with detent mechanism. Long operational life	JC400
	Rugged Multi-Axis Joystick Controller Product Code: JC6000 Key Features Rugged design with superior lever strength Single or Dual axis control Range of ergonomic handle designs Hall Effect or Potentiometric sensing Analog or CAN outputs Sealed above panel to IP66 Safety features - switch/logic functions Superb proportional control Easily installed and interchangeable with model JC600	JC6000
	Multi-Axis Switched Joystick Controller Product Code: SWJ Key Features Single or dual axis control Self-centering lever action IP65 sealed above the flange when protective gaiter fitted	SWJ
	Multi-Axis Switched Rocker Product Code: SWR Key Features Designed for simple thumb operation Up to four half-axis control Self-centering rocker action IP66 sealed above the panel when ´O´ ring is fitted	SWR
	Single Axis Friction Lock Joystick Controller Product Code: T-Bar Key Features Single axis control 'Put and stay' friction lever action Proportional analogue output Choice of mounting through side or top	T-Bar

CurtissWrightLogo RGB S

			<Prev Page 1 2 3
Type	Description		PDF
	Linear Displacement Sensor Product Code: SLS320 Key Features Shorter body to stroke length Sealing to IP66 and corrosion resistant rod end bearings Integrally moulded M12 industry standard connector Significantly reduced weight Rapid delivery CE approved Interchangeable with Penny+Giles' model HLP350 linear potentiometers		Digital Panel Indicator Products SLS320 Data Sheet SRS and SLS Brochure SLS and MLS Brochure SSC Sensor Signal Conditioning

	Contactless Linear Position Transducer Product Code: SLT190 Key Features Contactless sensing with inductive coil technology Small transducer body length to stroke ratio 25mm to 500mm stroke range Infinite resolution Absolute measurement Rugged stainless steel construction, resistant to shock and vibration Operates from -40 to +150°C CE approved Rapid despatch of any length		Digital Panel Indicator Products SLT190 Data Sheet EICT/EICTM Tech Data Sheet

	Valve Position Transducer Product Code: VPT210 Key Features Non-contact Hall effect technology Suitable for measurement range of ±3mm to ±11mm Single channel output (dual channel OEM option) On-board signal conditioning Supply voltage 6.5 to 34Vdc Outputs 0.5 to 4.5Vdc or PWM Burst pressure rating 600 Bar (8400psi) Working pressure rating 420 Bar (5880psi)		Industrial Sensors and Controls VPT210 Data Sheet

	Wirewound Rectilinear Potentiometers Product Code: WWLP Penny+Giles' wirewound rectilinear potentiometers are legacy products that are custom manufactured to specific order requirements, and are available in three ranges. Model LP1 is flange mounted and is available with stroke lengths from 0.5" to 6.0". Can be specified for use in temperatures up to 200°C and can be supplied with single or dual electrical output. Model LP2 is supplied with self-aligning bearing mountings and is available with stroke lengths from 0.5" to 6.0". Can be specified for use in temperatures up to 200°C and can be supplied with single or dual electrical output. Model LP6 is flange mounted and is fitted with a spring loaded shaft and ball ended probe, enabling the instrument to follow positional variations of the actuating medium without the need for attachment. Can be supplied in stroke lengths from 0.75" to 4.5". Can be specified for use in temperatures up to 200°C and can be supplied with single or dual electrical output.		Industrial Sensors and Controls
			<Prev Page 1 2 3

CurtissWrightLogo RGB S

			<Back
Type	Description		PDF
	Contactless Rotary Sensor - Single and Dual Output Product Code: SRH280P/DP Key Features Contactless - Hall effect technology Single or Dual output channels 5Vdc or 9-30Vdc supply Total sensor measurement range from 0-20° to 0-360° Analog or Digital (PWM) output 12 bit resolution over selected measuring range Low noise level (1mVrms) on output signal Operating temperature -40° to +140°C Environmental protection to IP68 Crush-proof mounting flange with steel inserts		Contactless Rotary Sensors Products

	Contactless Rotary Sensor - Dual Output Product Code: SRH501/2P Key Features Contactless - Hall effect technology Single or dual redundant output Analog or Digital (PWM) output Measurement range 20° to 360° 12 bit resolution CW or ACW output Less than 1mVrms output noise Rugged housing design, in marine grade aluminium Superior shaft strength Sealing option to IP69K M12 connector option for easy installation		Contactless Rotary Sensors Products

	Contactless Submersible Rotary Sensor Product Code: SRH880P Key Features Contactless - Hall effect technology Single output channel 5Vdc or 9-30Vdc supply Total sensor measurement range from 0-20° to 0-360° Analogue or Digital (PWM) output 12 bit resolution over selected measuring range Low noise level (1mVrms) on output signal Rugged 88mm housing design, available in aluminium or stainless steel Superior shaft strength with double bearing support Operating temperature -40° to +120°C Environmental protection to IP68 M12 connector for easy installation Mating cabled socket with 2m or 5m cable length		Contactless Rotary Sensors Products

	Sealed Rotary Sensor Product Code: SRS280 Key Features Angles from 10 to 350° in 10° increments Crush-proof mounting flange with steel inserts Choice of two shaft attachments Duplex shaft bearing support system Integrally moulded sheathed cable assembly Cable length 0.5m or 2m Sealed to IP50 or IP68		Digital Panel Indicators Sealed Rotary Sensor (SRS) Brochure Sensor Signal Conditioning (SSC) Brochure

	Contactless Throttle Position Sensor - Dual Output Product Code: TPS280DP Key Features Electrically interchangeable with potentiometers More than 9x the life of a potentiometer Extremely low signal noise, for the life of the sensor Will operate from -40 to +140°C, with excursions to +170°C Sealed to withstand high pressure wash-downs (IP69K) Mechanically interchangeable with potentiometers on 32mm mountings Standard output is dual channel Configurable output direction, for left or right fitment Measurement range from 20 to 360° in 1° increments 12 bit resolution (0.025%) over the angular range Analog (0.5 - 4.5 or 0.1 - 4.9Vdc) or PWM outputs		Digital Panel Indicators Sealed Rotary Sensor (SRS) Brochure Sensor Signal Conditioning (SSC) Brochure

	Wirewound Rotary Potentiometers Product Code: WWRP Penny+Giles' wirewound rotary potentiometers are legacy products that are custom manufactured to specific order requirements, and are available in three ranges. Models RP/E are built with end terminals in synchro sizes 08 to 18. Models RP/S have side terminal configuration and can be built with multi-cup potentiometer systems or where multi-tapping points are required. They are built in synchro sizes 09 to 25. Models 3410 are end terminal precision potentiometers available in synchro size 15, with resistance values of 1k, 2k or 5k. These rotary potentiometer designs include a low mass rotor assembly which minimises rotational inertia. Low contact noise and low torque are achieved by using twin noble metal wipers and slip ring brushes. A working life of between 20 and 50 million operations can be achieved, depending on options selected.		Contactless Rotary Sensors Products
			<Back

CurtissWrightLogo RGB S

			<Prev Page 1 2 3 Next Page>
Type	Description		PDF
	Linear Displacement Sensor Product Code: MLS130 Key Features Compact body to stroke length Choice of mountings, including metal rod-ends Sealed to IP66 with optional protective sleeve Integrally moulded rear cable with 'DR25' sheath Rapid delivery CE approved		Digital Panel Indicator Products SLS and MLS Brochure MLS130 Data Sheet SSC Sensor Signal Conditioning

	Hall Effect Contactless Linear Sensor Product Code: SLH100 Key Features 28mm measuring range 5V or 8-30Vdc supply 0.5 to 4.5Vdc output -40 to +125°C working range Features an on-board micro controller that linearises the sensor output Robust, sealed housing Suitable for high dither vibration conditions Virtually infinite life		Digital Panel Indicator Products SLH100 Data Sheet SSC Sensor Signal Conditioning

	Linear Displacement Sensor Product Code: SLS095 Key Features Short body to stroke length Sealing to IP66 and corrosion resistant rod end bearings Cable assembly integrally moulded Significantly reduced weight Rapid delivery CE approved Replacement for Penny+Giles' model HLP095 linear potentiometer		Digital Panel Indicator Products SLS095 Data Sheet SRS and SLS Brochure SLS and MLS Brochure SSC Sensor Signal Conditioning

	Linear Displacement Sensor Product Code: SLS130 Key Features Short body to stroke length Sealing to IP66 and corrosion resistant rod end bearings Cable assembly integrally moulded Significantly reduced weight Rapid delivery CE approved Interchangeable with Penny+Giles' model HLP129 linear potentiometers		Digital Panel Indicator Products SLS130 Data Sheet SRS and SLS Brochure SSC Sensor Signal Conditioning

	Linear Displacement Sensor Product Code: SLS190 Key Features Short body to stroke length Sealing to IP66 and corrosion resistant rod end bearings Cable assembly integrally moulded Reduced weight Rapid delivery CE approved Interchangeable with Penny+Giles' model HLP190/SA linear potentiometer		Digital Panel Indicator Products SLS190 Data Sheet SRS and SLS Brochure SLS and MLS Brochure SSC Sensor Signal Conditioning

	Linear Displacement Sensor Product Code: SLS220 Key Features Spring loaded shaft with 10 and 20mm stroke range Cable assembly integrally moulded Rapid delivery CE approved Replacement for Penny+Giles' model HLP220 linear potentiometer		Digital Panel Indicator Products SLS220 Data Sheet SRS and SLS Brochure SLS and MLS Brochure SSC Sensor Signal Conditioning
			<Prev Page 1 2 3 Next Page>

Valves		Description		PDF
		100/150 Series Mini Needle Valves Features & Benefits Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 100 Series hard seat valves have a maximum pressure of 10,000 psi for stainless steel and steel models; 6,000 psi for brass 150 Series soft tip valves feature a patented Delrin® non-rotating soft tip stem, a back-up metal-to-metal seal, and have a maximum pressure of 6,000 psi for stainless steel and steel models; 3,000 psi for brass Available in Zinc-nickel plated steel, electropolished stainless steel, and brass Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve without compromising the flow, and help maintain the integrity of the bonnet threads by segregating them from the process media		100/150 Series

		200 & 300 Series Multiport Hard & Soft Seat Needle Valves Metal to metal hard seat design is 100% Helium leak tested to 1 x 10-4 ml/s at 200 psi. 10000 psi pressure rating (@ 200°F maximum) SOFT SEAT VALVE FEATURES Soft seat design is 100% Helium leak tested to 1 x 10-4 ml/s at 200 psi. 6000 psi pressure rating (@ 200°F maximum) Replaceable Delrin seat. Straight through porting for bi-directional, high capacity flow and easy roddable cleaning.		200/300 Series

		400 Series Hard Seat Needle Valves 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 10,000 psi pressure rating (@ 200°F maximum) Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap Optional panel mount bonnet and panel nuts		400 Series

		500 Series Soft Seat Needle Valves 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 6,000 psi pressure rating (@ 200°F maximum) Replaceable Delrin® seat and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap Optional panel mount bonnet and panel nuts		500 Series

		600 Series Block & Bleed Hard Seat Needle Valves Features & Benefits These valves allow pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 10,000 psi pressure rating (@ 200°F maximum) Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Optional panel mount bonnet and panel nuts 0.090 bleed hole located on the bottom is controlled by a 1/4-20 UNF-2B bleed screw		600 Series

		700 Series Block & Bleed Soft Seat Needle Valves Features & Benefits These valves allow pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 6,000 psi pressure rating (@ 200°F maximum) Replaceable Delrin® seat and straight through porting for bi-directional, high capacity flow and easy roddable cleaning PCTFE or PEEK soft seat optional Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Optional panel mount bonnet and panel nuts 0.090 bleed hole located on the bottom is controlled by a 1/4-20 UNF-2B bleed screw		700 Series

		800/850 Series Bleed Valves - Hard Seat & Soft Tip Features & Benefits These valves provide a convenient means to relieve process pressures trapped between a shut off valve and the instrument Use the same bonnet assemblies of the 100/150 Series Mini Valves with an integrated single threaded body for insertion in vent port 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 10,000 psi hard seat pressure rating (@ 200°F maximum) Available in Zinc-nickel plated steel, electropolished stainless steel, and brass Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation 0.159 bleed hole Patent-pending body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve without compromising the flow, and help maintain the integrity of the bonnet threads by segregating them from the process media		800/850 Series

		2070 Series 2-Valve Block & Bleed Hard Seat Needle Valves Features & Benefits Combine isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation The 1/4" NPT vent plug is located 90° to the left may be removed and replaced with exhaust piping to direct the fluids to a safe location 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 10,000 psi hard seat pressure rating (@ 200°F maximum) Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Optional panel mount bonnet and panel nuts

		2170 Series 2-Valve Block & Bleed Soft Seat Needle Valves Features & Benefits Combine isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation The 1/4" NPT vent plug is located 90° to the left may be removed and replaced with exhaust piping to direct the fluids to a safe location 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability 2170 Series soft seat valves have 6,000 psi pressure rating (@ 200°F maximum) 2170 Series valve also features a replaceable Delrin® seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning PCTFE or PEEK soft seat optional Blow-out proof stem provides a secondary stem seal in the full open position Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Optional panel mount bonnet and panel nuts

Page 29 of 51